Ministry of Paintball 2.0 — the world's most charitable way to play paintball.
We give players access to over 100 independent indoor and outdoor paintball fields across the UK and Australia, with online booking, passes and membership options for regions including the US, Canada, New Zealand and Ireland.
Paintball safety checklist: inspecting your mask and barrel
A paintball day is fast, physical and often played outdoors, so reliable protective equipment matters from the first briefing until the last marker is cleared. Your mask and barrel are two of the most important items to inspect because they protect your eyes, face and everyone nearby from an accidental shot.
A mask should be treated as safety equipment, not ordinary sportswear. A scratched lens, loose strap or damaged frame can become a serious hazard when paintballs are travelling at high speed. The barrel also needs attention: a blocked, cracked or poorly secured barrel can affect accuracy and create an unsafe situation.
Whether you are attending a field near Sydney, Melbourne, Brisbane, Perth or a smaller regional centre, the operator’s instructions take priority. Independent fields may use different marker brands, staging areas and briefing procedures, but the essential checks remain consistent. Allow a few quiet minutes before play to examine your gear rather than relying on appearance alone.
Check the mask before putting it on
Start with the lens, since this is the part that directly protects your eyes. Hold the mask in good light and look for cracks, chips, deep scratches, clouding, loose lens clips or signs that the lens has been forced out of its frame. A few small marks may seem harmless, but scratches can catch glare and make it harder to see players, boundaries and low branches.
Never clean a paintball lens with a dry shirt, paper towel or rough cloth. These materials can create fine scratches, particularly on thermal or anti-fog lenses. Use the field-approved cleaning method, usually a soft microfibre cloth or a designated lens cleaner. Solvents, household glass sprays and insect repellent can damage lens coatings, so keep them away from the mask.
Inspect the mask body around the lens channel, chin area and sides. Check for splits, severe deformation, missing clips or brittle plastic. If the lens appears loose or the frame has been damaged, do not tape it together and continue playing. Hand it to the marshal or field staff for assessment and replacement.
Test the strap, frame and fit
The rear strap must hold the mask firmly against your face when you move, crouch and turn quickly. Look for fraying, stretched elastic, damaged buckles and stitching that is beginning to separate. Adjust the strap so the mask sits securely without pressing painfully against your nose or cheekbones. A loose fit can allow a paintball to enter from below or cause the mask to shift during a sprint.
Use both hands to check that the lens and frame are seated correctly, but do not twist or bend the mask aggressively. If the field supplies rental equipment, tell staff when the mask feels loose, pinches, fogs immediately or does not seal comfortably. Paintball masks are designed for impact protection, but they only work properly when worn as intended.
Keep the mask on in every area where markers may be live. In Australia, many fields divide the venue into a safe area, staging zone and active field. The safe area may allow masks to be removed only after markers have been unloaded and barrel covers fitted. A sunny bush field can make people want to lift a mask to wipe sweat, but wait for the marshal’s instruction and move to the designated safe zone.
Look after the lens in Australian conditions
Heat, humidity and dust are common causes of poor visibility during Australian paintball sessions. A humid morning around Brisbane, a hot summer afternoon outside Perth or a dusty field near western Sydney can produce fogging and grime quickly. Anti-fog thermal lenses can help, but they are not a substitute for correct airflow, a suitable mask fit and careful cleaning.
Avoid placing the mask lens-down on a picnic table, car bonnet or the ground. Dust and grit can scratch it, while direct sunlight can heat the lens unnecessarily. Keep the mask in a soft bag or on a clean surface when it is not being worn. If paint gets on the inside, stop in a safe area and follow the operator’s cleaning procedure rather than rubbing aggressively while still in play.
Sun protection needs to be compatible with your equipment. Apply sunscreen before gearing up and keep oily products away from the lens. A hat may be permitted under some masks, while bulky caps or hoods can interfere with the seal and strap. Drink water regularly, especially during school holiday sessions and warmer months, when dehydration can make players careless with protective equipment.
Inspect the barrel and bore
Before attaching or using a marker, make sure the barrel is clear of paint, dirt, leaves and other obstructions. A quick visual check from the breech end is useful only after the marker has been made safe and the barrel has been removed according to the field’s instructions. Never look down the barrel while it is attached to a marker, and never point the marker at yourself or another person during inspection.
Run a field-approved squeegee or barrel swab through the barrel when instructed. Paint residue can build up after a break, reducing accuracy and causing a marker to behave unpredictably. A bent squeegee, damaged thread or incorrect barrel insert can also create problems. Check that the barrel threads are clean and that the barrel screws into the marker smoothly without force.
Examine the outside of the barrel for dents, cracks or damaged threads. A barrel tip that is loose or visibly damaged should be removed from service. Do not try to repair a cracked component with adhesive or use a substitute part that was not designed for the marker. Rental operators and field technicians can provide the correct replacement and confirm that the marker is safe.
Fit the barrel cover and control the marker
A barrel cover, sometimes called a barrel sock, must be fitted whenever the marker is outside an active game and capable of firing. The cover should sit securely over the barrel and be held by its retaining cord or strap. Check that the elastic is not stretched beyond its useful range and that the cover is not torn, split or loose.
A barrel plug or cover does not replace safe handling. Keep the marker pointed in a safe direction, remove the air supply when required, switch the marker off and follow the field’s unloading process. Your finger should remain outside the trigger guard until the game has started and the marshal has given permission to fire. Never rely on a safety switch alone.
During a game, stop firing if the marker sounds different, the barrel becomes obstructed, paint breaks inside it or accuracy changes sharply. Raise your marker as directed, call for a marshal and keep your mask on. Do not remove the barrel cover or attempt a field repair in an unsafe zone. Marshals are trained to clear the area and deal with equipment issues without exposing players unnecessarily.
Follow field rules and local requirements
Australian paintball venues operate under their own risk controls, insurance conditions and state or territory requirements. Rules concerning paintball markers, age limits, supervision, transport and storage can vary between jurisdictions, so players should use equipment through an authorised field and comply with its briefing. In places such as New South Wales, Victoria and Queensland, operators may have specific obligations relating to marker control and participant safety.
This is especially important for private groups bringing their own equipment. A marker that is acceptable at one venue may require inspection, approval or a particular air system at another. Fields commonly check velocity with a chronograph before play and may restrict modifications, ammunition types or barrel systems. Never alter a marker to increase firing speed, and never bypass a field’s testing procedure.
After every game, keep the mask on until the marshal announces that the field is safe. At the end of the session, unload the marker, disconnect the air source as instructed, fit the barrel cover and return rental equipment to the designated area. Check the mask once more for paint, moisture and damage before storing it. Reporting a cracked lens, loose strap or faulty barrel helps prevent the same item reaching another player.
Ministry of Paintball works with independent fields across Australia and the United Kingdom, giving groups access to paintball sessions, discounted bookings and free VIP entry opportunities at participating venues. When arranging a birthday, workplace activity or team day, the safest booking is one that uses an established field with trained marshals, inspected equipment and a clear safety briefing. The proceeds also support charitable initiatives such as the WOW! awareness and fundraising platform, linking an active day outdoors with wider community benefit.
Find Your Field
Book indoor and outdoor games at independent venues offering obstacles such as tanks, forts, trucks and bridges, with coverage spanning the UK, Australia, USA, Canada, New Zealand and Ireland.
Passes & Membership
WOW! passes and the mopVIP membership offer discounted paintball tickets, with pass purchases supporting the charitable causes at the heart of Ministry of Paintball 2.0. Full details and pricing are handled through the booking system.
From the Gallery
A look back at Ministry of Paintball across the years, from its long-standing charitable work in Australia and the UK to the launch of the 2.0 network.